*CONTACT US FOR EXCLUSIVE PRICING* FULLY INSTALLED Thinkware F200K16 / 16GB - 2 Channel
*CICK HERE TO CONTACT US FOR EXCLUSIVE PRICING*
THINKWARE DASH CAM F200
Full HD Front Recording + HD Rear Recording*
2 Channel Capable with Full HD 1080P Front - HD 720p Rear | Energy Saving Parking Recording140° Wide Angle | Safety Camera Alert | Advanced Video Clear Technology | G-Sensor Incident Detection | Built-in Wi-FiFormat Free 2.0 | Integrated Thermal Protection | Mobile App (Android & iOS) | PC Viewer (Windows & Mac OS)
VARIOUS AUTONOMOUS RECORDING MODES
Automatically Switching Recording Modes
Get in and go without having to worry about if your Thinkware Dash Cam is recording.Thinkware Dash Cam's automatically switch recording modes depending on the vehicle is doing
Continuous Recording Mode
This mode is activated automatically when you start the car.Recorded videos are saved in one-minute segments with an auto-looping mechanism.
Event Recording Mode
The active impact monitoring system will automatically store the video data10-seconds prior to and after a collision registered by the 3-axis G-Sensor,saving a 20-second video into the designated Event Detection folder on thememory card. No searching through hours of footage to find the right video. Easy.
Manual Recording Mode
By pressing the Manual Recording button your Thinkware Dash Camwill capture events that occur in front of your vehicle whether or not it is in motion. Manual Recording Mode will save 10-seconds prior to and 50-seconds after the button press saving a 1-minute video into the designated Manual Recording folder on the memory card.
Parking Surveillance Mode*
Once your vehicle is turned off Thinkware Dash Cam will enter Parking Surveillance Mode,combining impact detection with motion detection or time lapse (if supported)*Parking Surveillance Mode requires the use the Hard Wiring Cable (HWC)
HIGH DEFINITION VIDEO QUALITY
CMOS Image Sensors allow constant Full 1080p Front and HD 720p Rear recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
COMPREHENSIVE DRIVING INFORMATION WITH GPS
With the GPS Tracker, Thinkware Dash Cams can record the vehicle's driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed, the time of a collision, and the severity of the impact.
The video recording feature not only stores driving footages in the case of an event, but it can also be used to track your holiday travel routes.
*GPS requires the use the optional GPS Antenna (GPSANT)
SAFETY CAMERA ALERTS*
Thinkware Dash Cams GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.
Cultivate safe driving habits with THINKWARE DASH CAM.
RED LIGHT CAMERA WARNING
FIXED SPEED CAMERA WARNING
RED LIGHT & FIXED SPEED CAMERA WARNING
AVERAGE SPEED CAMERA WARNING
MOBILE SPEED CAMERA ZONE
ENERGY SAVING PARKING RECORDING
Energy saving mode will reduce power consumption by 1/3 less and gives 3x longer video recording than normal parking mode. When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and soon after an impact has been detected by built-in G-senor, it will wake up within a second and start recording for next 20 seconds.
PC VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO
The intuitive and easy-to-use interface of THINKWARE DASH CAM PC VIEWER allows you convenient access to your recorded videos with G-sensor and GPS data such as speed and location. Compatible with both PC and Mac.
You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the PC Viewer.
SOPHISTICATED IMPACT DETECTION
The X, Y, Z axes of the G sensor allow you to measure fluctuations in gravity, speed or rotation. You can figure out the axial movement and impact during an accident at a glance.
THE NEW STANDARD FOR DASH CAMS: DUAL SAVE
Dual Save technology is specially designed to save recorded footages in both the microSD memory card and the built-in internal memory in incident recording mode. It functions as a safeguard against the possible loss of data in the aftermath of a severe collision. In the event that the memory card gets damaged, the Dual Save Technology guarantees a backup copy of the video in the internal memory of the F200.
* The Dual Save Technology is activated when a specific level of impact is detected (The impact sensitivity is adjustable in the Dash Cam's settings).
THERMAL PROTECTION, CAUSE AUSTRALIA GETS HOT!
All THINKWARE Dash Cams feature Thermal Protection and are specially designed for efficient heat dissipation, but if the extreme Aussie heat gets too much, a built-in thermal sensor protects the device and its data against intense heat by automatically turning it off to prevent overheating.
FORMAT FREE TECHNOLOGY
Format Free Technology utilizes the TAT (Time Allocation Table) save system instead of the FAT (File Allocation Table) system. This allows THINKWARE’s proprietary Format Free Technology to eliminate the need for periodical manual formatting of recorded video files on the microSD memory card. It also helps extend the life of your memory card. You can view recorded video files on any PC or smartphone without having to worry about converting files. THINKWARE DASH CAM saves the hassle of manually clearing memory space.